AT TIME OF PROGRAMMING,
ALL REMOTES (UP TO 3) TO BE PROGRAMED/REPROGRAMMED MUST BE PRESENT.
The following steps 1-12 are done on a single remote, step 13 is done on all remotes to be
programmed. (Up to 3 can be programmed)
1) Get into the car shut the doors and make sure they are unlocked
2) Turn on the ignition (do not turn on the car just the ignition)
3) Press the lock button on remote
4) Turn key to the accessory ON position (your radio works in this mode)
5) Turn on the ignition (do not turn on the car just the ignition)
6) Press the lock button on remote
7) Turn key to the accessory ON position (your radio works in this mode)
8) Turn on the ignition (do not turn on the car just the ignition)
9) Press the lock button on remote
10) Turn key to the accessory ON position (your radio works in this mode)
11) Turn on the ignition (do not turn on the car just the ignition)
12) Press the lock button on the remote, the locks should chirp to indicate that programming
mode was entered successfully
13) Press the LOCK button on remote, the doors should chirp again to confirm programming.
PRESS THE LOCK BUTTION ON EACH OF THE REMAINING REMOTES TO BE
PROGRAMMED (ONE AT A TIME)
14) Turn off the car fully and try locking/unlocking with remote
--
