Product Description
NOTE: If your vehicle does not already have the remote start option, buying this remote will not give you that feature! (see note below on AP3 vs AP8 codes).
This remote fits the vehicles listed below:
• Buick Enclave (2008-2016)
• Chevrolet Avalanche (2007-2013)
• Chevrolet Captiva Sport (2012-2016)
• Chevrolet Equinox (2007-2009)
• Chevrolet Express (2008-2021)
• Chevrolet Silverado (2007-2013)
• Chevrolet Suburban (2007-2014)
• Chevrolet Tahoe (2007-2014)
• Chevrolet Traverse (2009-2016)
• GMC Acadia (2007-2016)
• GMC Savana (2008-2014)
• GMC Sierra (2007-2014)
• GMC Yukon (2007-2014)
- GMC Savana (2008-2021)
• Hummer H2 (2008-2009)
• Pontiac Torrent (2007-2009)
• Saturn Outlook (2007-2009)
• Saturn Vue (2008-2009)
PROGRAMMING: Your vehicle must be programmed to recognize the remote. You can do this yourself UP TO and including model year 2010. Instructions are included. Starting in 2011 GM removed the on-board programming and you will have to take your vehicle to a dealer or locksmith to have it programmed with diagnostic equipment.
Programming Notes: SATURN VEHICLES ALL YEARS DO NOT HAVE AN ON-BOARD PROGRAMMING METHOD. You will need to go a dealership or automotive locksmith for programming. .
This remote will replace:
Part #: 20952474, 15913421, 20868672, 22759546, 22936098 FCC ID: OUC60270 or OUC60221 CAN: 850K60270 or 850K60221
GM AP8 vs AP3
There is a lot of confusion surrounding the AP8 code regarding remote start capability on GM vehicles.
AP3 is factory INSTALLED remote start - meaning the vehicle has remote start already
AP8 is Remote Start PREP package (meaning remote start can be added later)
IF YOUR VEHICLE HAS AP8:
Only the dealer can install the remote start. You have to buy the remote start package from GM. It comes with two key fobs and instructions.
The instructions have a unique code that comes with the package and the dealer has to use this key to get a VIN specific code from GM. This GM
Code is then used by the technician to activate and unlock the remote start in the BCM.
This is why you cannot just buy the key fobs without the special code. GM will not give out the unlock code without being given the one from
the OEM remote start package.
Once it is unlocked in the BCM you can then use any remote start key fob without going through this procedure again.
Once again: CODE AP8 MEANS IT HAS THE PREP PACKAGE, IT DOES NOT ACTUALLY HAVE REMOTE START AND JUST BUYING REMOTES WITH THE R/S BUTTON WILL NOT GIVE YOU THAT FUNCTION.
Reviews
-
Easy to program and works!
Programmed easily and works perfectly.
-
2008 gmc sierra
extremely fast delivery. im in phoenix arizona so im local but i ordered on friday morning and recieved on saturday in mail. programming was fast and easy . Im very satisfied with my purchase and i have already referred several friends to this company.
-
Easy Programming
Programming was easy, only one problem the remote start button does not function. Any suggestions?
-
Good service
The locksmith thought one of the two remotes purchased was defective. Keyless-Remote sent out a replacement immediately with no questions ask and before I could return the remote in question. Great to have two new remotes in operation.
-
Very convenient
Very impressed with the fast delivery and ease of use.
-
2 Keyless Remote Control
I was really impressed with the delivery and product. The instruction for programming was very easy. Thanks
-
Works as advertised
Works as advertised, 1/3rd the cost of one new unit at the dealership, not including the programming cost. Took 30 seconds to program bothe remotes. Couldn't be happier.
-
Quick
Easy to order, quick to be shipped, simple to program, work fine.
-
Quick programming
Fast shipping and quick programming, Very easy setup. Thanks again.
