Select image to enlarge
One blank key with 80-bit transponder chip. This is a blank key that must be cut to match your current key and your car must be programmed to recognize the transponder. You can do this yourself provided you already have two working master keys that start the vehicle. If you do not have two working, factory transponder keys, you will need a dealer or locksmith to do the programming with computerized equipment hooked up to the car. Most hardware stores and other places that cut keys do not have the correct equipment for this. Please make sure your technician has the correct programming equipment to do this. Cut keys are not returnable or refundable.
You are buying ONE key. Picture shows both sides.
This key fits the vehicles listed below:
Review the product description for vehicle applications and equipment requirements.
Listed vehicles are a starting point, not a guarantee of compatibility. Visually identical remotes may not be interchangeable. Check ignition type, factory equipment and any required product options.
Vehicle listings are a starting point, not a guarantee of electronic compatibility. Compare identifiers and factory equipment before purchasing.
Posted by CARLOS DOMINGUEZ on 25th Nov 2024
Great products
Posted by Jerry Slegl on 26th Aug 2024
Worked and programmed perfectly.
Posted by Gayle Thompson on 1st Sep 2023
Satisfied with the product.
Posted by Brock on 28th Feb 2022
No issues with useability or prgramming,slight setback with the Ford emblem "sticker" comming off when I took the keys out of the pkging. A little super glue and it was attached again. Let me just say, these are super affordable and a reasonable cost. First looking into getting keys and my local hardware store wanted $90 / key! That is just crazy and I would go without spares before doing that. I am thrilled to have found a source that makes it possible for me to purchase keys to have as spares. My local hardware store cut the keys. The programming instructions were east to follow and upon completion, all current and new keys worked correctly.
Posted by Margaret Henderson on 15th Jul 2021
worked perfectly. I could have programed, but did not have two working keys to program with. took to dealer and there was no problems, key worked like the orginal. much more cost effective that dealship. they wanted close to $200 for the key fob and key I got from keyless remote. will recommend to others
Posted by Margaret Henderson on 15th Jul 2021
worked perfectly. I could have programed, but did not have two working keys to program with. took to dealer and there was no problems, key worked like the orginal. much more cost effective that dealship. they wanted close to $200 for the key fob and key I got from keyless remote. will recommend to others
Posted by Unknown on 9th Jun 2020
Got it cut Ace for free, had to regular keys did what it said instructions
Posted by Unknown on 8th Jun 2020
The loop on my old key to my 2007 Taurus broke recently. I did a little research and came across Keyless Remotes and ordered two blank keys. I had them cut and programmed them and they both work great!!
Posted by Mike Meyer on 13th May 2020
Perfect key had it cut at Ace Hardware 2 dollars programmed myself works great. Super fast shipping thanks again
Popular Trending Products
Two blank keys with 80-bit transponder chip. This is a blank key that must be cut to match your cur…
Transponder key blank for Nissan and Infinity vehicles. Most modern automobiles have keys with trans…
This is a blank transponder key with the CADILLAC emblem and will work with all of the vehicles list…
This is a Strattec after market transponder key blank and will work on the cars in the chart below. …
Transponder key blanks for Nissan and Infinity vehicles. Most modern automobiles have keys with tran…
